Home > Electronics > Switches > DIP Switches
Sort By:
Page of 1
Philmore 30-1008 8 Position Dip Switch
Philmore's 30-1008 8 position DIP Switch has contacts rated for 50 VDC @ 100ma continuous and 24 VDC @ 25ma make or break.

Features

  • Initial contact resistance 100mA, 30meg Ohm @ initial
  • Initial contact resistance 100mA, 100meg Ohm after life test
  • Insulation resistance 500 VDC 100meg Ohm (min) between adjacent terminals
  • Dielectric strength 500 VAC for 1 min between adjacent terminals
  • Operation life 5000 make/break cycles @ test speed 72 cycle/min
  • Operation force 500g max
  • Shock withstands 20g 11ms sawtooth waveform w/no contact opening > 10ms
  • Vibration no mech damage or int change of setting during or after test
  • Case and cover material UL 94V-O Polybutylene Telephtalate
  • Top seal material Polyester film
  • Potting material Epoxy
  • Contact material nickel, phosphor bronze w/gold plate
  • Terminal material nickel, phosphor bronze w/gold plate
  • Terminal type - solder
  • Length .860"
  • Positions 8
  • Actuator white UL 94V-O PBT